[j-nsp] Replacement HD/SSD for RE-850

[Colin Baker]

Thanks everyone. I ended up ordering the newer version of the Transcend 8gb SLC, will report back with photos.


  Original Message  
From: Markus
Sent: Saturday, July 25, 2015 9:25 AM
To: Tom Storey
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Replacement HD/SSD for RE-850

Am 25.07.2015 um 10:42 schrieb Tom Storey:
> I wonder if some double sided tape would suffice to hold it in place
> until it needed to be replaced?

I doubt it, and IMHO, it's not necessary. When you plug the HDD into the 
connector, the tail of the HDD will lift up, just like on the picture. 
And that's the final position. It's tight, it doesn't move. Nothing else 
to do there. Just to be clear: I've been running a RE like this for some 
years now, no problems. It's a SSD after all, you could plug it in 
upside down if you wanted. And unless you move your router twice a day 
for several years it won't come loose.

Or just use a SSD that fits better. :)

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp