[j-nsp] Setting CoS bits on ingress frames

Mark Tinka mark.tinka at seacom.mu
Thu Jun 18 01:52:43 EDT 2015



On 17/Jun/15 16:10, Victor Sudakov wrote:
> All right, if I have Internet traffic in VLAN10 and video cameras in
> VLAN20, how do I mark on egress frames belonging to VLAN20 with CoS=1
> and those belonging to VLAN20 with CoS=4 ?

I stay away from such configurations. They make my head boil :-).

Sorry, can't be more help. Egress marking is complicated depending on
network topology. This is why I pushed hard for Policy Map.

Mark.


More information about the juniper-nsp mailing list