[j-nsp] VPLS stuck in VC-Dn - inet.3 lookup problem
Alberto Santos
albertofsantos at gmail.com
Mon Jun 22 18:39:04 EDT 2015
Hi,
I'm set upping VPLS + Inter AS option B with the following topology and I'm
noticing a lookup problem between ASBRs.
LAN |--(AC)-----PE-----P----ASBR1----ASBR2----(AC)------| LAN
since I'm only running eBGP family l2vpn, ASBR2 does not have any other
route in inet3 that could be use to bring the vpls connection up.
I tried to setup a /32 static route, it fixed the VPLS singling, but I'm
still not learning any MAC address through VPLS.
has anyone experienced that before?
ASBR2
user at ASBR2-re0# run show route 192.168.1.1
inet.0: 17 destinations, 18 routes (17 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.1.0/30 *[Direct/0] 4d 06:01:43
> via xe-1/0/0.100
Instance: VPN2000
Local site: Site(3)
connection-site Type St Time last up # Up trans
1 rmt VC-Dn Jun 23 00:21:05 2015 1
Remote PE: 192.168.1.1, Negotiated control-word: No
Incoming label: 800080, Outgoing label: 800002
Local interface: vt-1/1/10.1049344, Status: Up, Encapsulation: VPLS
Description: Intf - vpls VPN2000 local site 3 remote site 1
---------------------------
run show route
inet.0: 17 destinations, 18 routes (17 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.1.0/30 *[Direct/0] 4d 06:16:57
> via xe-1/0/0.100
inet.3: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.1.1/32 *[Static/5] 00:13:27
to table inet.0
run show vpls connections
1 rmt Up Jun 23 00:23:32 2015 2
Remote PE: 192.168.1.1, Negotiated control-word: No
Incoming label: 800080, Outgoing label: 800002
Local interface: vt-1/1/10.1049344, Status: Up, Encapsulation: VPLS
Description: Intf - vpls VPN2000 local site 3 remote site 1
BR
Alberto
More information about the juniper-nsp
mailing list