[j-nsp] MX104 Limitations
Saku Ytti
saku at ytti.fi
Thu Jun 25 07:10:16 EDT 2015
On (2015-06-25 12:59 +0200), Mark Tinka wrote:
Hey Mark,
> For example, a lack of H-QoS on the MX80 or MX104 is not a show-stopper
> for us if we are using it as a peering/border router. As an edge router
MX80 and MX104 fully support HQoS. Only limitation is that QX can only be used
for MIC ports, so you cannot do per-VLAN subrate services on chassis ports.
It is absolutely the same hardware as MPC on bigger JNPR, with same features
and limitations.
Only difference is, that MPC 'wastes' 50% of capacity for fabric, and
MX104/MX80 spend this capacity for additional ports. (In MX80 where fabric
should sit, you have MIC cards)
--
++ytti
More information about the juniper-nsp
mailing list