[j-nsp] Juniper mx80 mirror ae0 to ge

[dmitry at zhigulinet.ru]

Hi, Juniper-nsp.

I tried configure port mirrror on mx80, but i have problem I don't
watch traffic on the port ge-1/0/5

set chassis fpc 1 pic 1 port-mirror-instance mirror_reductor
set forwarding-options port-mirroring instance mirror_reductor input rate 1
set forwarding-options port-mirroring instance mirror_reductor input run-length 0
set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2
set forwarding-options port-mirroring instance mirror_reductor family inet output no-filter-check
set firewall filter mirror_reductor term dst-http-https from protocol tcp
set firewall filter mirror_reductor term dst-http-https from destination-port 80
set firewall filter mirror_reductor term dst-http-https from destination-port 443
set firewall filter mirror_reductor term mirror then count mirror_reductor
set firewall filter mirror_reductor term mirror then port-mirror-instance mirror_reductor
set firewall filter mirror_reductor term default then accept

set interfaces ae0 unit 0 family inet filter input mirror_reductor


set interfaces ge-1/0/5 description --mirror-to-reductor--
set interfaces ge-1/0/5 unit 0 family inet address 192.168.98.1/30 arp 192.168.98.2 mac 00:11:22:33:44:55
set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2

set interfaces ge-1/1/0 gigether-options 802.3ad ae0
set interfaces ge-1/1/1 gigether-options 802.3ad ae0
set interfaces ge-1/1/2 gigether-options 802.3ad ae0
set interfaces ae0 unit 0 family inet address 123.143.143.246/30


-- 
Best regards
 Dmitry                          mailto:dmitry at zhigulinet.ru