[j-nsp] MPLS EX4550

Giuliano (WZTECH) giuliano at wztech.com.br
Fri Mar 6 16:06:47 EST 2015


We didnt find a solution because ex4550 (junos) code does not support 2 different families for the same interface (yet) ... Using 12.3R8

I think the new switches ex4600, ex4300 fiber and qfx5100 will support it considering junos ELS and it new hardware

Sent from my iPhone

> On Mar 6, 2015, at 18:01, Levi Pederson <levipederson at mankatonetworks.net> wrote:
> 
> Giuliano,
> 
> I thank you for the prompt reply.  I had originally thought that would create a loop on the switch, but I believe you are right in that it will just shunt the VLAN as anticipated.  However,  I was wondering if there was a a solution that can be accomplished without having to use a loop-cable?
> 
> Thank you,
> 
> 
> Levi Pederson
> Mankato Networks LLC
> cell | 612.481.0769
> work | 612.787.7392
> levipederson at mankatonetworks.net
> 
> 
>> On Fri, Mar 6, 2015 at 2:57 PM, Giuliano (WZTECH) <giuliano at wztech.com.br> wrote:
>> We have a situation here and we find a way ... We connect 2 interfaces in a optical cable loop ... One that came from a trunk interface ... Family ethernet-switching and other family mpls with L2-circuit to do a vlan traffic to enter in a mpls interface
>> 
>> Sent from my iPhone
>> 
>> > On Mar 6, 2015, at 17:51, Levi Pederson <levipederson at mankatonetworks.net> wrote:
>> >
>> > All,
>> >
>> > I've got a simple MPLS setup with 4 EX4550's.
>> >
>> > They are currently in an incomplete ring but will soon have a full ring
>> > situation.
>> >
>> > I've currently got 3 circuits on the transport working wonderfully.
>> > However I'm trying to add another alas I'm a bit confused as how to proceed.
>> >
>> > Previous other circuits were easier in the fact they were simply saying the
>> > port on MPLS1-1 is equivalent to this port on MPLS 3-1.
>> >
>> > The new circuit is different in that I have to take a VLAN recieved on a
>> > trunk port and send it through the MPLS network to 3-1 and then into a
>> > vlan-tagged MX-10.
>> >
>> > I was wondering if anyone has attempted this and has any pointers.
>> >
>> > Thank you,
>> >
>> > *Levi Pederson*
>> > Mankato Networks LLC
>> > cell | 612.481.0769
>> > work | 612.787.7392
>> > levipederson at mankatonetworks.net
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


More information about the juniper-nsp mailing list