[j-nsp] mc-lag standby peer not ageing out MAC addresses
Syed Iftikhar Ahmed
iahmed at emw-me.com
Wed Mar 18 14:04:23 EDT 2015
Hi,
I think iccp is up because you have a redundant path available using ae10 to reach iccp peer. I faced similar issue on a customer site and had to separate iccp link using l3 lag between chassis.
Also please check if you have multi-chassis protection enabled, we enabled it on mc-lag interfaces as well as mc-lag unit0 as well as per Engineering recommendation. Also for arp learning we need to add arp entry for each irb interface to ensure arp is learned over ICL link not via a mc-lag interface.
I assume you have rstp disabled already for mc-lag interfaces.
Sent from my iPhone
On Mar 18, 2015, at 9:35 PM, Luca Salvatore <luca at digitalocean.com<mailto:luca at digitalocean.com>> wrote:
here it all is.
You'll just have to trust me that the ping works between peers using the ICCP IP.
We use public addressing on these and I don't want to post the public IPs here. I've changed them to 10.1.1.1 and 10.1.1.2 in the output. I'm able to ping without issue.
Some details
ae0 is the iccp / icl link
ae10 is a random mc-lag interface
We have been running this config in prod in numerous sites for a while. This particular set of switches has a difference of about 80,000 mac addresses between each core.
core1> show interfaces mc-ae id 10
Member Link : ae10
Current State Machine's State: mcae active state
Local Status : active
Local State : up
Peer Status : active
Peer State : up
Logical Interface : ae10.0
Topology Type : bridge
Local State : up
Peer State : up
Peer Ip/MCP/State : 10.1.1.2 ae0.0 up
core1> show configuration interfaces ae0 | display set
set interfaces ae0 mtu 1522
set interfaces ae0 aggregated-ether-options link-speed 10g
set interfaces ae0 aggregated-ether-options lacp active
set interfaces ae0 aggregated-ether-options lacp periodic fast
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members 1010-1050
core1> show configuration interfaces ae10 | display set
set interfaces ae10 mtu 1522
set interfaces ae10 aggregated-ether-options link-speed 10g
set interfaces ae10 aggregated-ether-options lacp active
set interfaces ae10 aggregated-ether-options lacp periodic fast
set interfaces ae10 aggregated-ether-options lacp system-id 00:00:00:00:00:10
set interfaces ae10 aggregated-ether-options lacp admin-key 8888
set interfaces ae10 aggregated-ether-options mc-ae mc-ae-id 10
set interfaces ae10 aggregated-ether-options mc-ae redundancy-group 3
set interfaces ae10 aggregated-ether-options mc-ae chassis-id 0
set interfaces ae10 aggregated-ether-options mc-ae mode active-active
set interfaces ae10 aggregated-ether-options mc-ae status-control active
set interfaces ae10 aggregated-ether-options mc-ae events iccp-peer-down prefer-status-control-active
set interfaces ae10 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae10 unit 0 family ethernet-switching vlan members 1010-1050
core1> show configuration protocols iccp | display set
set protocols iccp local-ip-addr 10.1.1.1
set protocols iccp peer 10.1.1.2 redundancy-group-id-list 3
set protocols iccp peer 10.1.1.2 liveness-detection minimum-interval 500
set protocols iccp peer 10.1.1.2 liveness-detection minimum-receive-interval 500
set protocols iccp peer 10.1.1.2 liveness-detection multiplier 2
set protocols iccp peer 10.1.1.2 liveness-detection transmit-interval minimum-interval 1000
set protocols iccp peer 10.1.1.2 liveness-detection detection-time threshold 2000
core2> show interfaces mc-ae id 10
Member Link : ae10
Current State Machine's State: mcae active state
Local Status : active
Local State : up
Peer Status : active
Peer State : up
Logical Interface : ae10.0
Topology Type : bridge
Local State : up
Peer State : up
Peer Ip/MCP/State : 10.1.1.1 ae0.0 up
core2> show configuration interfaces ae0 | display set
set interfaces ae0 mtu 1522
set interfaces ae0 aggregated-ether-options link-speed 10g
set interfaces ae0 aggregated-ether-options lacp active
set interfaces ae0 aggregated-ether-options lacp periodic fast
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members 1010-1050
core2> show configuration interfaces ae10 | display set
set interfaces ae10 mtu 1522
set interfaces ae10 aggregated-ether-options link-speed 10g
set interfaces ae10 aggregated-ether-options lacp active
set interfaces ae10 aggregated-ether-options lacp periodic fast
set interfaces ae10 aggregated-ether-options lacp system-id 00:00:00:00:00:10
set interfaces ae10 aggregated-ether-options lacp admin-key 8888
set interfaces ae10 aggregated-ether-options mc-ae mc-ae-id 10
set interfaces ae10 aggregated-ether-options mc-ae redundancy-group 3
set interfaces ae10 aggregated-ether-options mc-ae chassis-id 1
set interfaces ae10 aggregated-ether-options mc-ae mode active-active
set interfaces ae10 aggregated-ether-options mc-ae status-control standby
set interfaces ae10 aggregated-ether-options mc-ae events iccp-peer-down prefer-status-control-active
set interfaces ae10 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae10 unit 0 family ethernet-switching vlan members 1010-1050
set protocols iccp local-ip-addr 10.1.1.2
set protocols iccp peer 10.1.1.1 redundancy-group-id-list 3
set protocols iccp peer 10.1.1.1 liveness-detection minimum-interval 500
set protocols iccp peer 10.1.1.1 liveness-detection minimum-receive-interval 500
set protocols iccp peer 10.1.1.1 liveness-detection multiplier 2
set protocols iccp peer 10.1.1.1 liveness-detection transmit-interval minimum-interval 1000
set protocols iccp peer 10.1.1.1 liveness-detection detection-time threshold 2000
On Wed, Mar 18, 2015 at 12:13 PM, Syed Iftikhar Ahmed <iahmed at emw-me.com<mailto:iahmed at emw-me.com>> wrote:
Sh interface mc-ae id xx
Iccp link configuration.
Ping output between chassis using iccp ips
And any one mc-lag interface config from both chassis
Sent from my iPhone
On Mar 18, 2015, at 7:50 PM, Luca Salvatore <luca at digitalocean.com<mailto:luca at digitalocean.com>> wrote:
Hi,
Yes VRRP is in use. Running 13.2R5.10, single RE.
Running active-active
What config do you want to see? I don't want to post the whole thing.
On Tue, Mar 17, 2015 at 7:09 PM, Syed Iftikhar Ahmed <iahmed at emw-me.com<mailto:iahmed at emw-me.com>> wrote:
Is it active/ active or active/ standby setup. Config for 9200 is different than the One mentioned jn Kb, are you using vrrp as well?
Please post your config, junos version.
Do you have two RE in chassis or one?
Sent from my iPhone
> On Mar 18, 2015, at 12:39 AM, Luca Salvatore <luca at digitalocean.com<mailto:luca at digitalocean.com>> wrote:
>
> Hi,
>
> Anyone seen an issue where the standby mc-lag peer does not age out MACs
> that it has learned from the active peer?
>
> i'm seeing a huge difference in the mac address count on two ex9208 mc-lag
> peers. By huge I mean about 75,000 difference.
>
> some basic testing shows that when a mac address is aged out of the active
> peer, the standby one just keeps it forever.
>
> Thanks
> Luca.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Luca Salvatore
Network Engineer
Cell: +1 (929) 214-7242<tel:%2B1%20%28929%29%20214-7242>
Desk: +1 (347) 305-4030<tel:%2B1%20%28347%29%20305-4030>
--
Luca Salvatore
Network Engineer
Cell: +1 (929) 214-7242
Desk: +1 (347) 305-4030
More information about the juniper-nsp
mailing list