[j-nsp] L2 tunnel over IP on ex4200-24t

[Mark Tees]

Hi Victor,

The only way I am aware of that works with ex4200s is tunnelling over
MPLS. This would require MPLS on the backbone to work.

http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/mpls-ex-series-provider-edge-switches-ccc-cli.html

Cheers,

Mark





On Tue, May 12, 2015 at 1:49 PM, Victor Sudakov <vas at mpeks.tomsk.su> wrote:
> Colleagues,
>
> I have several ex4200-24t switches with JunOS 12.3R6.6 and an Advanced
> licensed routing protocols license.
>
> Is there a way to tunnel L2 traffic over an IP network between two
> ex4200-24t switches? I wish to emulate a L2 trunk (with several VLANs,
> MSTP and OAM) over a Layer3 network.
>
> Now I am doing it with the help of two FreeBSD servers encapsulating
> Ethernet frames into UDP packets via a complicated netgraph setup. I
> would be happy to get rid of them and use only ex4200-24t switches if
> possible.
>
> Thank you for any input.
>
> --
> Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> sip:sudakov at sibptus.tomsk.ru
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



-- 
Regards,

Mark L. Tees