[j-nsp] LACP on mixed virtual chassis QFX5100/EX4300

[Vincent Clement]

Hello,

Pretty sure QFX in 10G only, so if you want to achieve that, you'll have to
use a uplink module to have 10G on 4300 side.

Vincent

2015-11-04 2:23 GMT+01:00 Michael Loftis <mloftis at wgops.com>:

> I'd take a closer look at show interfaces. When a link is 1gig QFX calls it
> ge-. So you can have an ex-0/0/1 and a ge-0/0/1 but only one is active as I
> do not believe tri rate SFP+ is supported.
>
> On Tuesday, November 3, 2015, ThienDuc Nguyen <thienduc.nguyen at zayo.com>
> wrote:
>
> > Hi
> >
> > I was trying to create a LACP bundle between two ports : one on a EX4300,
> > the other on a QFX5100.
> > Both link have their speed negotiated at 1GE (but the interface name on
> the
> > QFX is xe-, I can't force it to ge-, and their are no way to force the
> > speed on the QFX).
> > if I set the lacp speed to 1ge, the configuration can't commit because it
> > sees the QFX interface as a 10G interface...
> >
> >
> > Is their a special knob to activate it, or I need to create LACP on the
> > same device family ?  (the version is  14.1X53-D30.3)
> >
> > Thanks,
> >
> > *Thien Duc Nguyen*
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
> --
>
> "Genius might be described as a supreme capacity for getting its possessors
> into trouble of all kinds."
> -- Samuel Butler
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Vincent Clément
+33 6 74 49 66 30