[j-nsp] LACP on mixed virtual chassis QFX5100/EX4300

Vincent Clement vclement.mail at gmail.com
Thu Nov 5 05:29:26 EST 2015


Auto-correct: seems I was wrong, I thought that because no negocation
options on xe interfaces, but should be supported as you said.
I'll make more tests, but I had trouble trying to connect 1G/100M on
QFX5100-48T with old devices.

Vincent

2015-11-05 11:04 GMT+01:00 Vincent Clement <vclement.mail at gmail.com>:

> Hi Farid :)
>
> Yes, but was assuming we talk about 48T, so only 10G as far as I know, no
> way to negociate 1G.
>
> Vincent
>
> 2015-11-05 10:54 GMT+01:00 Bouzemarene, Farid (ATS) <
> Farid.Bouzemarene at avnet.com>:
>
>> Hi vincent ;)
>>
>> QFX support 1g also but you have to use 1g SFP !
>>
>> I had no luck with Cisco or other vendors optics but with juniper ( or
>> solidoptics / juniper ) there is no problem .
>>
>> Farid
>>
>> -----Original Message-----
>> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
>> Of Vincent Clement
>> Sent: mercredi 4 novembre 2015 19:12
>> To: Michael Loftis
>> Cc: juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] LACP on mixed virtual chassis QFX5100/EX4300
>>
>> Hello,
>>
>> Pretty sure QFX in 10G only, so if you want to achieve that, you'll have
>> to use a uplink module to have 10G on 4300 side.
>>
>> Vincent
>>
>> 2015-11-04 2:23 GMT+01:00 Michael Loftis <mloftis at wgops.com>:
>>
>> > I'd take a closer look at show interfaces. When a link is 1gig QFX
>> > calls it ge-. So you can have an ex-0/0/1 and a ge-0/0/1 but only one
>> > is active as I do not believe tri rate SFP+ is supported.
>> >
>> > On Tuesday, November 3, 2015, ThienDuc Nguyen
>> > <thienduc.nguyen at zayo.com>
>> > wrote:
>> >
>> > > Hi
>> > >
>> > > I was trying to create a LACP bundle between two ports : one on a
>> > > EX4300, the other on a QFX5100.
>> > > Both link have their speed negotiated at 1GE (but the interface name
>> > > on
>> > the
>> > > QFX is xe-, I can't force it to ge-, and their are no way to force
>> > > the speed on the QFX).
>> > > if I set the lacp speed to 1ge, the configuration can't commit
>> > > because it sees the QFX interface as a 10G interface...
>> > >
>> > >
>> > > Is their a special knob to activate it, or I need to create LACP on
>> > > the same device family ?  (the version is  14.1X53-D30.3)
>> > >
>> > > Thanks,
>> > >
>> > > *Thien Duc Nguyen*
>> > > _______________________________________________
>> > > juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
>> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
>> > >
>> >
>> >
>> > --
>> >
>> > "Genius might be described as a supreme capacity for getting its
>> > possessors into trouble of all kinds."
>> > -- Samuel Butler
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>> >
>>
>>
>>
>> --
>> Vincent Clément
>> +33 6 74 49 66 30
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
>
> --
> Vincent Clément
> +33 6 74 49 66 30
>



-- 
Vincent Clément
+33 6 74 49 66 30


More information about the juniper-nsp mailing list