[j-nsp] RES: VC on a QFX5100 won't go away

[Alexandre Guimaraes]

> show virtual-chassis 

Preprovisioned Virtual Chassis
Virtual Chassis ID: cf12.a99f.e63b
Virtual Chassis Mode: Enabled
                                                Mstr           Mixed Route Neighbor List
Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  Interface
0 (FPC 0)  Prsnt    TA3714071234 qfx5100-48s-6q 129   Master*      N  VC   2  vcp-255/0/50
                                                                          					 1  vcp-255/0/51
1 (FPC 1)  Prsnt    TA3714141234 qfx5100-48s-6q 129   Backup       N  VC   0  vcp-255/0/50
                                                                          					 2  vcp-255/0/51
2 (FPC 2)  Prsnt    TA3714141234 qfx5100-48s-6q   0   Linecard     N  VC   1  vcp-255/0/50
			                                      				0  vcp-255/0/51


See vcp-255/0/51 ports:

> show virtual-chassis vc-port 
fpc0:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port
0/50        Configured         -1    Up           40000        2   vcp-255/0/51
0/51        Configured         -1    Up           40000        1   vcp-255/0/50

fpc1:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port
0/50        Configured         -1    Up           40000        0   vcp-255/0/51
0/51        Configured         -1    Up           40000        2   vcp-255/0/50

fpc2:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port
0/50        Configured         -1    Up           40000        1   vcp-255/0/51
0/51        Configured         -1    Up           40000        0   vcp-255/0/50


So:

request virtual-chassis vc-port delete pic-slot X port Y member   Z







-----Mensagem original-----
De: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] Em nome de Dave Peters - Terabit Systems
Enviada em: quinta-feira, 12 de novembro de 2015 18:05
Para: juniper-nsp at puck.nether.net
Assunto: [j-nsp] VC on a QFX5100 won't go away

Hi all--

I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38, and I'm not having any luck. I've tried zeroizing and going into the shell to remove the files in the config/vchassis folder, but I'm having no luck.  Looking at the config, I'm seeing:

root> show configuration

<snip>
commit {
        factory-settings {
            reset-virtual-chassis-configuration;
            reset-chassis-lcd-menu;
<snip>

root>

Which isn't on a factory default system, but I can't seem to clear that portion of the configuration, and I when I delete the .conf files from the shell, the commit/factory-settings/reset-vc stuff pops up all over again.

This is probably a really simple thing, but I'm not getting it. Can anyone help?

Thanks much.

--Dave Peters
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp