[j-nsp] Fwd: L2VPN between ASR920 and Juniper

Alireza Soltanian soltanian at gmail.com
Mon Sep 21 10:17:03 EDT 2015


Hi Everybody

When I try to establish L2VPN connection between ASR920 and Juniper M320, I
have this output on ASR920:



ASR920#show mpls l2transport vc detail

Local interface: Gi0/0/4 up, line protocol up, Eth VLAN 810 up

  Destination address: 10.234.233.29, VC ID: 2631, VC status: down

    Last error: Imposition VLAN rewrite capability mismatch with peer



I am using different VLANs on both side:

ASR920: VLAN 810

Juniper M320: VLAN 2631



This is configuration on ASR side:



interface GigabitEthernet0/0/4

no ip address

media-type auto-select

negotiation auto

service instance 1 ethernet

  encapsulation dot1q 810

  rewrite ingress tag pop 1 symmetric

  xconnect 10.234.233.29 2631 encapsulation mpls



this is configuration on Juniper M320



set interfaces xe-1/0/0 unit 2631 encapsulation vlan-ccc

set interfaces xe-1/0/0 unit 2631 vlan-tags outer 3012

set interfaces xe-1/0/0 unit 2631 vlan-tags inner 2631

set interfaces xe-1/0/0 unit 2631 input-vlan-map pop

set interfaces xe-1/0/0 unit 2631 output-vlan-map push



set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631
virtual-circuit-id 2631

set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631
no-control-word

set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631 mtu
1500



Do you have any idea what is the issue?


More information about the juniper-nsp mailing list