[j-nsp] HDD requirements for RE-333 and RE-600

[Markus]

Hi,

Am 24.09.2015 um 18:53 schrieb Martin T:
> Now if I replace this HDD with Hitachi HTS541680J9AT00 80GB, 5400rpm
> PATA HDD in slave mode, then both RE-333 and RE-600 even do not pass
> the POST. RE does not seem to boot at all. According to specs, Hitachi

I have only M7i's with RE-400 and RE-850 where I replaced the HDDs with 
SSDs, so I'm only guessing, its a shot in the dark, but did you try 
cable-select instead of slave?

If it doesnt change anything I would try a HDD (SSD) with the exact same 
size than the original.

Regards
Markus