[j-nsp] HDD requirements for RE-333 and RE-600

[Chris Cappuccio]

Martin T [m4rtntns at gmail.com] wrote:
> Hi,
> 
> while the original HDDs are in slave mode, I did try with cable-select
> and in master mode as well, but the RE did not boot with the Hitachi
> HTS541680J9AT00 HDD. I would expect to see at least the BIOS
> screen(http://s8.postimg.org/vuae8mx39/RE_600_BIOS_screen.jpg), but
> with Hitachi drive the RE does not seem to boot at all. That's the
> reason why I suspected the power consumption problem. However, any
> other ideas?
> 

Lots of drives are not compatible. Try another, but make sure you are
only changing one thing at a time. If you are putting in an different CF
card at the same time, you have no idea which change is incompatible
(perhaps both...)