[j-nsp] Questions about T640

[Jimmy]

resend

I'm sorry,
For T640, How about this announcement ?
https://gallery.mailchimp.com/1466897c24c515e6739f14c9e/files/TSB16819.pdf

On Mon, Apr 11, 2016 at 2:55 PM, Alireza Soltanian <soltanian at gmail.com>
wrote:

> No T640 and T4000 are still manufactured. Anyway is there anybody who can
> provide answer?
> On Apr 11, 2016 11:24 AM, "Fredrik Korsbäck" <hugge at nordu.net> wrote:
>
> > You do realize that most of T-series is EOL?
> >
> > Hugge@ as2603
> >
> > > 11 Apr 2016 kl. 07:02 skrev Alireza Soltanian <soltanian at gmail.com>:
> > >
> > > Hi
> > >
> > > Yes the price of MX Series is much higher.
> > >
> > >
> > >
> > > From: Josh Reynolds [mailto:josh at kyneticwifi.com]
> > > Sent: Monday, April 11, 2016 9:27 AM
> > > To: Alireza Soltanian <soltanian at gmail.com>
> > > Cc: Juniper List <juniper-nsp at puck.nether.net>
> > > Subject: Re: [j-nsp] Questions about T640
> > >
> > >
> > >
> > > Any reason to not go with the MX line here?
> > >
> > > On Apr 10, 2016 11:55 PM, "Alireza Soltanian" <soltanian at gmail.com
> > <mailto:soltanian at gmail.com> > wrote:
> > >
> > > Hi everybody
> > >
> > > We are going to change our M320 router with T640. There are some
> concerns
> > > about supported features on T640. We need to have following features on
> > this
> > > router:
> > >
> > >
> > >
> > > 1-      GRE Tunnels
> > >
> > > 2-      GRE Keepalive (OAM)
> > >
> > > 3-      802.1q over 802.1ad
> > >
> > > 4-      MPLS TE
> > >
> > > 5-      ATOM VLAN re-write
> > >
> > >
> > >
> > > We need to handle up to 80Gbps of traffic. Here is the setup:
> > >
> > > For Module setup we are going to use following FPC:
> > >
> > > -          T640-FPC3-ES
> > >
> > > For Physical connections we are going to use following PICs:
> > >
> > > 1-      PC-1XGE-TYPE3-XFP-IQ2
> > >
> > > 2-      PC-1XGE-XENPAK
> > >
> > > For GRE tunnels we are going to use following PICs:
> > >
> > > PC-Tunnel
> > >
> > > For Routing Engine following item is considered:
> > >
> > > -          RE- A-2000-4096-BB
> > >
> > > For SIB:
> > >
> > > -          SIB-I-T640-B
> > >
> > > For Control Board:
> > >
> > > -          CB-L-T
> > >
> > > And for Connector interface panel:
> > >
> > > -          CIP-L-T640-S
> > >
> > > Is there anybody here who can guide me is this setup good or not and
> can
> > I
> > > have the mentioned feature with T640? Also is there any note about
> > required
> > > JunOS version of this setup?
> > >
> > >
> > >
> > > Thank you
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net <mailto:
> > juniper-nsp at puck.nether.net>
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>