[j-nsp] QFX10002 as P Router

[Aaron]

Please remind me, how is the QFX different from the ACX5048/5096 ?  they
seem similar

Aaron

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
Giuliano Medalha
Sent: Saturday, April 16, 2016 11:51 AM
To: Mark Tinka <mark.tinka at seacom.mu>
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] QFX10002 as P Router

Qfx10002 uses Q5 it is a juniper asic not ?

Take a look

https://forums.juniper.net/t5/Data-Center-Technologists/Juniper-QFX10002-Tec
hnical-Overview/ba-p/270358

It is a small monster !!!



> On Apr 16, 2016, at 13:40, Mark Tinka <mark.tinka at seacom.mu> wrote:
> 
> 
> 
>> On 16/Apr/16 17:58, Richard Hicks wrote:
>> 
>> Thoughts on using the QFX10002 as a P only router?
>> WIll be our first big investment into Juniper hardware.
>> 
>> All PE functionally will live elsewhere.  Mainly Cisco ASR9k and 
>> ASR1k for now.
> 
> Multicast could be an issue, assuming this box is also running the 
> Broadcom chipset (I'm not sure).
> 
> Mark.
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp