[j-nsp] MPLS L2VPN Cisco and Juniper

[Mohammad Khalil]

Thanks a lot Aaron , much appreciated
So , VPLS (Cisco term) is operable with Juniper
Now , the l2circuit configuration I posted is functional ?
Because I want to propose my customers all options :)

BR,
Mohammad

On Mon, Apr 18, 2016 at 10:27 PM, Aaron <aaron1 at gvtc.com> wrote:

> you didn't tell me whether you wanted rfc4761 or rfc4762, so i'm giving
> you both of my scenario notes...make sure you prove this out before going
> live with it.  These were my notes from when I tested this in my lab last
> year…  hopefully I didn’t leave to much out and you can make sense of this…
>
>
>
> - Aaron
>
>
>
> ********************************************************************
>
> RFC4761 VPLS - BGP AD w/BGP Sig
>
>
>
> ***** MX104---
>
>
>
> set interfaces ge-1/3/2 encapsulation ethernet-vpls
>
>
>
> set interfaces ge-1/3/2 unit 0 family vpls
>
>
>
> set protocols mpls interface ge-1/3/0.0
>
>
>
> set protocols ldp interface ge-1/3/0.0
>
>
>
> set protocols ldp interface lo0.0
>
>
>
> set protocols bgp group ibgp type internal
>
>
>
> set protocols bgp group ibgp local-address 10.101.12.248
>
>
>
> set protocols bgp group ibgp family inet-vpn unicast
>
>
>
> set protocols bgp group ibgp family l2vpn signaling
>
>
>
> set protocols bgp group ibgp neighbor 10.101.0.254 local-as 64512
>
>
>
> set routing-instance vlan100 instance-type vpls
>
>
>
> set routing-instance vlan100 interface ge-1/3/2.0
>
>
>
> set routing-instance vlan100 route-distinguisher 10.101.12.248:32768
>
>
>
> set routing-instance vlan100 vrf-target target:65535:10100
>
>
>
> set routing-instance vlan100 protocols vpls
>
>
>
> set routing-instance vlan100 protocols vpls site-range 8
>
>
>
> set routing-instance vlan100 protocols vpls no-tunnel-service
>
>
>
> set routing-instance vlan100 protocols vpls site my_site site-identifier 2
>
>
>
> set routing-instance vlan100 protocols vpls site my_site interface
> ge-1/3/2.0
>
>
>
>
>
> ****** ASR9k---
>
>
>
> (i don't show port config with efp and into bridge domain)
>
>
>
> (also shown are inet and inet6 af's (what cisco calls vpnv4 and vpnv6, i
> don't think those were really needed for this vpls lab...)
>
>
>
> router bgp 64512
>
>
>
> neighbor-group rr-clients-l2vpn_4761-vpnv4-and-6
>
>
>
>   remote-as 64512
>
>
>
>   update-source Loopback0
>
>
>
>   address-family vpnv4 unicast
>
>
>
>   address-family vpnv6 unicast
>
>
>
>   address-family l2vpn vpls-vpws
>
>
>
>    Signalling ldp disable
>
>
>
> neighbor 10.101.12.248
>
>
>
>   use neighbor-group rr-clients-l2vpn_4761-vpnv4-and-6
>
> l2vpn
>
>
>
> autodiscovery bgp
>
>
>
>   signaling-protocol bgp
>
>
>
>    mtu mismatch ignore
>
>
>
> bridge group v100
>
>
>
>   bridge-domain v100
>
>
>
>    vfi v100
>
>
>
>     vpn-id 10100
>
>
>
>     autodiscovery bgp
>
>
>
>      rd auto
>
>
>
>      route-target import 65535:10100
>
>
>
>      route-target export 65535:10100
>
>
>
>      signaling-protocol bgp
>
>
>
>       ve-id 5
>
>
>
>       ve-range 11
>
>
>
>
>
> ************************************************************
>
> RFC4762 VPLS - BGP AD w/LDP Sig
>
>
>
> ***** MX104---
>
>
>
> set interfaces ge-1/3/2 encapsulation ethernet-vpls
>
>
>
> set interfaces ge-1/3/2 unit 0 family vpls
>
>
>
> set protocols mpls interface ge-1/3/0.0
>
>
>
> set protocols ldp interface ge-1/3/0.0
>
>
>
> set protocols ldp interface lo0.0
>
>
>
> set protocols bgp group ibgp type internal
>
>
>
> set protocols bgp group ibgp local-address 10.101.12.248
>
>
>
> set protocols bgp group ibgp family inet-vpn unicast
>
>
>
> set protocols bgp group ibgp family l2vpn auto-discovery-only
>
>
>
> set protocols bgp group ibgp neighbor 10.101.0.254 local-as 64512
>
>
>
> set routing-instances vlan100 instance-type vpls
>
>
>
> set routing-instances vlan100 interface ge-1/3/2.0
>
>
>
> set routing-instances vlan100 route-distinguisher 10.101.12.248:32768
>
>
>
> set routing-instances vlan100 l2vpn-id l2vpn-id:65535:10100
>
>
>
> set routing-instances vlan100 vrf-target target:65535:10100
>
>
>
> set routing-instances vlan100 protocols vpls no-tunnel-services
>
>
>
> ****** ASR9k---
>
>
>
> (i don't show port config with efp and into bridge domain)
>
>
>
> (also shown are inet and inet6 af's (what cisco calls vpnv4 and vpnv6, i
> don't think those were really needed for this vpls lab...)
>
>
>
> router bgp 64512
>
>
>
> neighbor-group rr-clients-l2vpn_4762-vpnv4-and-6
>
>
>
>   remote-as 64512
>
>
>
>   update-source Loopback0
>
>
>
>   address-family vpnv4 unicast
>
>
>
>   address-family vpnv6 unicast
>
>
>
>   address-family l2vpn vpls-vpws
>
>
>
> neighbor 10.101.12.248
>
>
>
>   use neighbor-group rr-clients-l2vpn_4762-vpnv4-and-6
>
>
>
> l2vpn
>
>
>
> bridge group v100
>
>
>
>   bridge-domain v100
>
>
>
>    vfi v100
>
>
>
>     vpn-id 10100
>
>
>
>     autodiscovery bgp
>
>
>
>      rd auto
>
>
>
>      route-target import 65535:10100
>
>
>
>      route-target export 65535:10100
>
>
>
>      signaling-protocol ldp
>
>
>
>       vpls-id 65535:10100
>
>
>
>
>
>
>
>