[j-nsp] MX80 base model

[Satish Patel]

How much it cost to activate 10G ports on MX104?

On Mon, Apr 25, 2016 at 8:27 PM, Josh Baird <joshbaird at gmail.com> wrote:
> The bundle that I purchased included S-MX104-ADV-R2, so no extra licensing
> for BGP or additional routes was necessary.
>
> Josh
>
> On Mon, Apr 25, 2016 at 8:03 PM, Mat Perkins <mat at instavps.com> wrote:
>>
>> Well, if you are happy running it against the licencing terms you don't.
>> If you want to run over 20k routes? They want you to buy the full layer3
>> license, and under the light one. So it will work, but don't expect support
>> on it.
>>
>> Mat
>>
>> On Mon, Apr 25, 2016 at 6:01 PM, Josh Baird <joshbaird at gmail.com> wrote:
>>>
>>> No 10G interfaces are unlocked on the base MX104-MX5 bundle.  This
>>> requires
>>> additional licensing.
>>>
>>> You don't need additional licensing for BGP.
>>>
>>> On Mon, Apr 25, 2016 at 7:39 PM, Satish Patel <satish.txt at gmail.com>
>>> wrote:
>>>
>>> > I check price on Internet it cost around $44k
>>> >
>>> > Now I need to check how many ports are open and how many locked in base
>>> > model because I don't want to pay money because out requirement is just
>>> > 10g
>>> > link with BGP support.
>>> >
>>> > --
>>> > Sent from my iPhone
>>> >
>>> > > On Apr 25, 2016, at 7:35 PM, Chris Kawchuk <juniperdude at gmail.com>
>>> > wrote:
>>> > >
>>> > > No.
>>> > >
>>> > >
>>> > >> On 26 Apr 2016, at 9:34 am, Satish Patel <satish.txt at gmail.com>
>>> > >> wrote:
>>> > >>
>>> > >> Also do I need to pay to run BGP?
>>> > >
>>> > _______________________________________________
>>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>> >
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>