[j-nsp] MPC-3D-16XGE-SFPP at 1G speed

[Andrey Kostin]

Or you can consider a new feature called Fusion ;)
http://www.juniper.net/techpubs/en_US/junos14.2/information-products/pathway-pages/junos-fusion/junos-fusion.html

Michael Loftis писал 26.04.2016 17:07:
> Yeah those are specifically NOT 1/10, just 10G.  In general with the 
> big
> MXes the MICs won't do 1/10.  For 1G you need like MIC-3D-20GE-SFP on 
> an
> MPC or like the DPCE-*-40GE-SFP or similar-ish.  It might be cheaper 
> to
> just use a cheap EX3300 or EX4300 w/ 2x10 (for redundancy) to the MX 
> if
> you've a fair amount of 1G that you're connecting...or really...if 
> you're
> connecting 1G at all to the MX rather than burning a slot (MIC slot 
> or
> router slot) on 1G interfaces.
>
> I actually can't think of ANY line card nor MIC for MX that does 
> 1/10...
>
> On Tue, Apr 26, 2016 at 12:23 PM, Dave Peters - Terabit Systems <
> Dave at terabitsystems.com> wrote:
>
>> Hi all--
>>
>> Stupid question, here. Can the MPC-3D-16XGE-SFPP run with 1G optics 
>> (e.g.
>> EX-SFP-1GE-SX), and if so, is there a specific port setting I need 
>> to
>> commit? I'm running an MX480 with 13.3R8.7, and Uncle Google hasn't 
>> been
>> too useful, yet.
>>
>> I tried:
>>
>> set interfaces xe-0/0/0 auto-negotiate
>>
>> inserted the EX-SFP-1GE-SX connected to an outside 1G port, no 
>> lights, no
>> joy.
>>
>> Any help is appreciated.
>>
>> Thanks much.
>>
>> --Dave Peters
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>

-- 
Kind regards,
Andrey