[j-nsp] SRX Deployment Questions

[Mehul Gajjar]

lacp need to configured on l3. not sure but not  possible to change hash

Cheers !!!
Mehul


On Mon, Aug 22, 2016 at 11:36 PM, Payam Chychi <pchychi at gmail.com> wrote:
> Check your load balancing hash, normally this is by default set to hash
> based on layer3/4 dst info, this means that if you are sending all traffic
> from one src to the same dst ip/port, it will only hash and bind to one
> interface.
>
>
>
> On Wednesday, 17 August 2016, Jeffrey Nikoletich <jeffn at xfernet.com> wrote:
>
>> Hello,
>>
>> We have a SRX we are deploying and are having some issues and some
>> guidance would be great. We have a SRX 3600 and want to deploy in the
>> following manner:
>>
>> It is connected via 2 Dell S55 External switches. 1 10G drop per switch.
>> We will call that subnet 1.1.1.0/24.
>>
>> On the Internal side. It is connected to 6 x Dell S55 switches. 1 10G drop
>> per switch. We will call that 10.0.0.0/24.
>>
>> For the internal, I setup a AE interface that has all 6 x 10G ports in it.
>> External has an AE interface as well. External is AE0 and internal is AE1.
>>
>> The issue I am have was it seems that the AE interfaces were only passing
>> traffic via a single interface? Any reason why?
>>
>> Also does this setup look "sane" just wanted some feedback as this is our
>> first SRX deployment.
>>
>> Thanks in advance.
>>
>>                 Regards,
>>
>> Jeffrey Nikoletich - Chief Information Officer | 213-201-6080
>>
>> Xfernet
>>  | 1-855-XFERNETPh  213-201-6080 | http://www.xfernet.net
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
> --
> Payam Tarverdyan Chychi
> Network Security Specialist / Network Engineer
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp