[j-nsp] SRX Deployment Questions

[Alexander Arseniev]

Hello there,

Looks like You have a dirty optic/bent cable/incompletely plugged-in 
connector in that one.

Check the light levels and PCS errors section in "show interfaces 
extensive xe-x/x/x" printout, it may get You some clues.

HTH
Thx
Alex

On 23/08/2016 09:43, Jeffrey Nikoletich wrote:
> So I did some testing with the tcp-mss setting and they did not seem to
> help. Oddly enough when I disabled one of the AE interfaces (xe-x/x/x) I
> then was able to get ample speeds. Any idea why? Is there a way to have AE
> interfaces in a active/passive setup?
>
>
>
> *
>
> 		Regards,
>
> Jeffrey Nikoletich - Chief Information Officer | 213-201-6080
>
> Xfernet
>   | 1-855-XFERNETPh  213-201-6080 | http://www.xfernet.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp