[j-nsp] Acx5048 vpls vlan-id

[Dan Rimal]

Hello,

I unfortunately  have the same issue on the branch SRX line (srx550 in
my case):

http://www.gossamer-threads.com/lists/nsp/juniper/56640

Daniel

On 02/05/2016 11:48 PM, Aaron wrote:
> Oh no !  I will have to look at this myself too.  I want more than one vlan
> to be able to ride a vpls instance too.  I will test this Monday in my lab.
>
> Aaron
>
> -----Original Message-----
> From: Giuliano Medalha [mailto:giuliano at wztech.com.br] 
> Sent: Friday, February 5, 2016 2:59 PM
> To: Aaron <aaron1 at gvtc.com>
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Acx5048 vpls vlan-id
>
> Aaron
>
> Thanks a lot
>
> Our problem is related to pass more than one vlan to the same vpls instance.
>
> We have some projects here that depends of it
>
> We will talk with juniper TAC and PLM to see the software roadmap of this
> box
>
> There is no chance to use this box in projects with this limitation, because
> other vendors with the same chipset have this feature running ok.
>
> It looks like to be a junos feature missing not a technical limitation ...
> Hope so !!!
>
> Thanks a lot anyway
>
> Att
>
> Giuliano
>
>
>
> Sent from my iPhone
>
>> On Feb 5, 2016, at 02:07, Aaron <aaron1 at gvtc.com> wrote:
>>
>> Hi Giuliano,
>>
>> I'm new to Juniper and learning as I go....but I'll at least show you 
>> what is in my lab.  I have a functioning vpls routing-instance that is 
>> working with ... ACX5048, MX104, Cisco ASR9006, Cisco ME3600...
>>
>> My acx5048 looks like this... here's some bits from the config...
>>
>> gvtc at eng-lab-acx5048-1> show version
>> fpc0:
>> ----------------------------------------------------------------------
>> ----
>> Hostname: eng-lab-acx5048-1
>> Model: acx5048
>> Junos: 15.1X54-D20.7
>>
>> set interfaces ge-0/0/1 speed 100m
>> set interfaces ge-0/0/1 encapsulation ethernet-vpls set interfaces 
>> ge-0/0/1 unit 0 family vpls
>>
>> (not shown here is the required, IGP (ospf), MPLS, ldp... that was 
>> simple)
>>
>> set protocols bgp group ibgp type internal set protocols bgp group 
>> ibgp local-address 10.101.12.245 set protocols bgp group ibgp family 
>> inet-vpn unicast set protocols bgp group ibgp family l2vpn 
>> auto-discovery-only set protocols bgp group ibgp neighbor 10.101.0.254 
>> local-as 64512
>>
>> gvtc at eng-lab-acx5048-1> show configuration | display set | match 
>> "routing-instances vlan100"
>> set routing-instances vlan100 instance-type vpls set routing-instances 
>> vlan100 interface ge-0/0/1.0 set routing-instances vlan100 
>> route-distinguisher 10.101.12.245:32768 set routing-instances vlan100 
>> l2vpn-id l2vpn-id:65535:10100 set routing-instances vlan100 vrf-target 
>> target:65535:10100 set routing-instances vlan100 protocols vpls 
>> no-tunnel-services
>>
>> gvtc at eng-lab-acx5048-1> show vpls connections brief
>> Layer-2 VPN connections:
>> ....
>> Instance: vlan100
>>  L2vpn-id: 65535:10100
>>  Local-id: 10.101.12.245
>>    Remote-id                 Type  St     Time last up          # Up trans
>>    10.101.0.254              rmt   Up     Feb  5 05:59:29 2016           1
>>    10.101.12.246             rmt   Up     Feb  5 05:59:29 2016           1
>>    10.101.12.248             rmt   Up     Feb  5 05:59:29 2016           1
>>    10.101.12.250             rmt   Up     Feb  5 05:59:29 2016           1
>>    10.101.12.251             rmt   Up     Feb  5 05:59:29 2016           1
>>
>> Aaron
>>
>> -----Original Message-----
>> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On 
>> Behalf Of Giuliano Medalha
>> Sent: Thursday, February 4, 2016 9:17 PM
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] Acx5048 vpls vlan-id
>>
>> People
>>
>> We are trying to configure vpls routing-instance in a ACX5048 box
>>
>> But the following command does not work after commit ...
>>
>> Routing-instances {
>>   VPLS-1 {
>>       instance-type vpls;
>>       ##
>>       ## Warning: statement ignored: unsupported platform (acx5048)
>>       ##
>>       vlan-id all;
>>       ##
>>       ## Warning: vlan-id-range is specified for this logical 
>> interface; 'vlan-id all' should also be enabled
>>       ##
>>       interface ae0.50;
>>       route-distinguisher ....
>>
>>
>> Is there another way to configure this feature ?
>>
>> Because on MX works OK and it is pretty simple
>>
>> Thanks a lot
>>
>> Giuliano
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp