[j-nsp] Junos Space Configlet with Variables

[Enoch Nyatoti]

Hi Steve,
Many thanks. Will give it a try. 
Best regards
Enoch Nyatoti

 

    On Tuesday, February 9, 2016 6:51 PM, "Hodgkiss, Steve G" <Steve.Hodgkiss at chevron.com> wrote:
 

 Hi - you need to become familiar with some velocity, xpath and variables to do what you want.

Assuming you want to source from a loopback0 address, then the base configlet you will need is something like:

#set($Loopback = $LOOPBACK_IP.replace("/32",""))
groups {
  tacacs {
        system {
            tacplus-server <*> {
                    source-address  $Loopback;
            }
        }
    }
}

Loopback is an invisible text field which we're using as a variable for just the IP address rather than the ip and mask
LOOPBACK_IP is another variable with a defined xpath of /device/configuration/interfaces/interface[name="lo0"]/unit/family/inet/address/name/text()
Hope this gets you going. 
Steve
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp