[j-nsp] About the family ccc config stanza
Raphael Mazelier
raph at futomaki.net
Wed Feb 10 13:03:33 EST 2016
The better to do is testing.
For example I have a case when I'm forced to used something like this :
ge-0/0/X {
encapsulation ethernet-ccc;
unit 0 {
family ccc;
}
}
With encapsulation ethernet-ccc i'm wondering what other family was
expected ? but without the "familly cccc" stanza it just not working :)
--
Raphael Mazelier
Le 10/02/2016 18:12, Pyxis LX a écrit :
> Hi, All.
>
> I'm not quite sure when to use the "family ccc" config stanza.
>
> I know that this stanza should be used when applying a filter or a
> policer, but what if I don't need one?
>
> The official document is not quite clear about this, either:
> http://www.juniper.net/techpubs/en_US/junos14.1/information-products/pathway-pages/config-guide-mpls-applications/config-guide-mpls-applications-ccc-tcc.pdf
>
> P.12: The vlan-ccc configuration does not have family ccc stanza, but
> the extended-vlan-ccc configuration has.
>
> Can this be safely omitted?
More information about the juniper-nsp
mailing list