[j-nsp] Enable EVPN on existing mpls l3vpn network

[Aaron]

I love my bgp route reflector cluster... all my pe's neighbor with 2 bgp rr
cluster members... anytime I want to add an address family to a pe, I add it
to one rr cluster neighbor session, it bounces, once routes have been
relearned over it, I add the af to the other rr neighbor session... No
outage on pe.  Love it

Aaron

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
tim tiriche
Sent: Thursday, February 18, 2016 12:44 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Enable EVPN on existing mpls l3vpn network

Hello,

I have an existing L3VPN network with NSR.

If i want to enable EVPN, is it just a matter of enabling family evpn
signalling on the bgp neighbors?

Will doing so, cause a session reset or affect existing production services
or something else i need to be aware of?  this will be on the junos
recommended 13.3R8 code.  I read NSR is not supported for EVPN.  If i enable
family evpn signalling will NSR be supported for existing l3vpn
functionality?

-Tim
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp