[j-nsp] syslog is flooded with curious messages (MX5 / 14.2R2.8)

[Chuck Anderson]

At least for the "ifa for this rt" message, it is a bug that was
fixed:

https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1067484

   "When setting the syslog to debug level (any any), you may note
    reoccurring messages of the form "ifa for this rt ia is not
    present, consider ifa as ready". These messages are logged for
    IPv6 enabled interfaces when receiving forwarded packets and cause
    no harm. Set a higher debug level to avoid seeing them.

    Resolved In  14.1R6 14.2R4 15.1R2"

On Fri, Jan 22, 2016 at 12:31:05PM +0100, Job Snijders wrote:
> On Fri, Jan 22, 2016 at 09:12:01AM -0200, Eduardo Schoedler wrote:
> > Same problem here...
> > 
> > Jan 22 09:05:04  router chassisd[1546]: Cannot read hw.chassis.startup_time: No such file or directory
> > Jan 22 09:05:14  router last message repeated 2 times
> > Jan 22 09:07:14  router last message repeated 24 times
> > Jan 22 09:08:59  router last message repeated 21 times
> 
> I upgraded to 15.1R2.9, and subsequently the above messages went away
> (hooray!) but in return I got the below:
> 
> 	Jan 22 11:29:32  eunetworks-1.router.nl.coloclue.net tfeb0 cmtfpc_vtreg_npc_create: Invalid I2C ID 0x556
> 	Jan 22 11:29:32  eunetworks-1.router.nl.coloclue.net tfeb0 cmtfpc_vtreg_npc_volt_get - Failed to create vtreg handle
> 	Jan 22 11:29:32  eunetworks-1.router.nl.coloclue.net tfeb0 cmtfpc_collect_voltage_status: failed reading Volterra volt data
> 	(endlessly)
> 
> Kind regards,
> 
> Job