[j-nsp] IDP-8200 LACP Support

[Michael Gehrmann]

Have read of the the install guide and look up Layer 2 Bypass. I think it
should be fine if configured correctly.

http://www.juniper.net/techpubs/en_US/idp-series/information-products/topic-collections/idp-8200-installation-guide-530-029731-01.pdf

Cheers
Mike

On 22 February 2016 at 22:52, Omar Ali via juniper-nsp <
juniper-nsp at puck.nether.net> wrote:

> Dear Experts,
> I would like to implement LACP between multiple interfaces of our two
> MX-10. But there is a IDP-8200 between them. My doubt is, will the LACP
> work through the IDP or not.
> Scenario is like below
>     MX-10-----IDP-----MX-10
>
>
> I don't like to make any change in the IDP to accomplish this.
> Your expert suggestion/opinion will be highly appreciated.
>
> Thanks,Omar
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp




-- 
Michael Gehrmann
Senior Network Engineer - Atlassian
m: +61 407 570 658