[j-nsp] MX960 2x MS-MPC-128
Josh Reynolds
josh at kyneticwifi.com
Fri Feb 26 14:54:40 EST 2016
Further info:
I just requested a restart of the FPC and for once it came online, but
now I'm seeing the following:
Message from syslogd@ at Feb 26 19:53:29 ...
fpc11 SCHED: Thread 40 (TNPC CM) ran for 1625 ms without yielding
Message from syslogd@ at Feb 26 19:53:29 ...
fpc11 Scheduler Oinker
Message from syslogd@ at Feb 26 19:53:30 ...
fpc11 Frame 00: sp = 0x4450ff08, pc = 0x400393a8
Message from syslogd@ at Feb 26 19:53:30 ...
fpc11 Frame 01: sp = 0x4450ff20, pc = 0x40030214
Message from syslogd@ at Feb 26 19:53:30 ...
fpc11 Frame 02: sp = 0x4450ff78, pc = 0x40032024
Message from syslogd@ at Feb 26 19:53:30 ...
fpc11 Frame 03: sp = 0x4450ffa8, pc = 0x40842320
Message from syslogd@ at Feb 26 19:53:30 ...
fpc11 Frame 04: sp = 0x44510000, pc = 0x40a26d7c
Message from syslogd@ at Feb 26 19:53:31 ...
fpc11 Frame 05: sp = 0x44510080, pc = 0x40811ebc
Message from syslogd@ at Feb 26 19:53:31 ...
fpc11 Frame 06: sp = 0x44510090, pc = 0x40854de0
Message from syslogd@ at Feb 26 19:53:31 ...
fpc11 Frame 07: sp = 0x445101c0, pc = 0x4085fca0
Message from syslogd@ at Feb 26 19:53:32 ...
fpc11 Frame 08: sp = 0x44510218, pc = 0x408112e8
Message from syslogd@ at Feb 26 19:53:32 ...
fpc11 Frame 09: sp = 0x44510588, pc = 0x40844458
Message from syslogd@ at Feb 26 19:53:32 ...
fpc11 Frame 10: sp = 0x44510598, pc = 0x402bf998
Message from syslogd@ at Feb 26 19:53:33 ...
fpc11 Frame 11: sp = 0x445105f8, pc = 0x400318e0
On Fri, Feb 26, 2016 at 1:50 PM, Josh Reynolds <josh at kyneticwifi.com> wrote:
> Hi all.
>
> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC
> locations, now the 2nd card boots in the first card's spot, but the
> 1st card won't boot in the previous spot of the 2nd card. Have tried
> several other slots for the 2nd card the with same results.
>
> show chassis hardware recognizes the MS-MPC-128 is installed, but no
> power. request chassis fpc online slot X shows: "Online initiated, use
> "show chassis fpc" to verify", but "show chassis fpc" still shows it's
> powered off.
>
> What gives?
>
> Thanks
More information about the juniper-nsp
mailing list