[j-nsp] mixed interface, switching + routed

[Hugo Slabbert]

On Tue 2016-Jul-05 13:51:26 -0500, Josh Reynolds <josh at kyneticwifi.com> wrote:

>Thanks Hugo, I'll try and give that a shot.
>
>So basically setup an ethernet-switching interface on unit 0, port
>mode trunk, native vlan as the current access vlan, member list
>includes the new vlan? 

Exactly.  One thing to watch: If you include the native vlan as a member as 
well, it will show up as both tagged and untagged on the port.  IOW, 
untagged frames as well as frames tagged with your native vlan ID will be 
accepted and plopped in the right VLAN, but frames from the VLAN egressing 
the port will be tagged, iirc.  Yea...

>I think I'm confused about how I would assign an RVI to this in that 
>state.
>
>Do you have a quick example config I might be able to work off of?

In a non-ELS setup, it would be something like:

interfaces {
     ge-x/y/z {
         unit 0 {
             family ethernet-switching {
                 port-mode trunk;
                 vlan {
                     members VLAN600;
                 }
                 native-vlan-id $your-native-vlan;
             }
         }
     }
     vlan {
         unit 600 {
             description "RVI for L3 in VLAN600"
             family inet {
                 address a.b.c.d/mask;
             }
         }
     }
}
vlans {
     VLAN600 {
         vlan-id 600;
         l3-interface vlan.600;
     }
}

Check after committing that VLAN membership is as you expect it:

`show ethernet-switching interfaces ge-x/y/z`

>Thank you!

np

-- 
Hugo Slabbert       | email, xmpp/jabber: hugo at slabnet.com
pgp key: B178313E   | also on Signal
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20160705/bd8402bb/attachment-0001.sig>