[j-nsp] 6VPE routes learned and hidden - ACX5048

[Aaron]

Next subtopic related to 6VPE in my ACX5048 please...

this is done on one ACX5048... so both vrf "three" and "one" are on same
ACX5048 PE

i advertise a ipv6 prefix into a vrf named "three" with RT 1:1 and 3:3

i try to receive that same ipv6 prefix into a vrf named "one" with RT 1:1...
it isn't showing up.  any idea why?

agould at eng-lab-5048-2# run show route advertising-protocol bgp 10.101.0.1
table three.inet6.0

three.inet6.0: 7 destinations, 15 routes (7 active, 0 holddown, 0 hidden)
  Prefix                  Nexthop              MED     Lclpref    AS path
* 1234:5678:0:7::/64      Self                         100        I

{master:0}[edit]
agould at eng-lab-5048-2# run show route receive-protocol bgp 10.101.0.1 table
one.inet6.0

one.inet6.0: 4 destinations, 12 routes (4 active, 0 holddown, 0 hidden)
  Prefix                  Nexthop              MED     Lclpref    AS path
  ::/0                    ::ffff:10.101.0.2            100        1234 I
                          ::ffff:10.101.0.5    32      100        56789 I
                          ::ffff:10.101.0.10           100        139 I
* 1234:5678::/32          ::ffff:10.101.0.10   0       100        I
* 1234:5678:0:5::/64      ::ffff:10.101.0.254  0       100        ?
* 1234:5678:0:6::/64      ::ffff:10.101.12.100 0       100        ?

{master:0}[edit]
agould at eng-lab-5048-2# run show route advertising-protocol bgp 10.101.0.1
table three.inet6.0 detail | grep arg
     Communities: target:1:1 target:3:3

{master:0}[edit]
agould at eng-lab-5048-2#

{master:0}[edit]
agould at eng-lab-5048-2# run show route receive-protocol bgp 10.101.0.1 table
one.inet6.0 detail | grep arg
     Communities: target:1:1
     Communities: target:1:1
     Communities: target:1:1
     Communities: target:1:1
     Communities: target:1:1
     Communities: target:1:1


- Aaron