[j-nsp] MPC4E-32XGE firmware

[Bill Blackford]

Quick note. 'show system firmware' appears to be a hidden command.



On Tue, Mar 1, 2016 at 11:00 AM, Wojciech Janiszewski <
wojciech.janiszewski at gmail.com> wrote:

> Hi Jonas,
>
> The easiest way is to install jfirmware package appropriate for your Junos
> release (you can get it from JTAC) and then:
> - show system firmware
> to check that there is a new software available
> - request system firmware upgrade pic fpc-slot X pic-slot Y
> to upgrade firmware
> - show system firmware
> to check that the firmware is upgraded
> - request chassis mic fpc-slot X mic-slot Y offline
> - request chassis mic fpc-slot X mic-slot Y online
> - request system software delete jfirmware
>
> Regards,
> Wojciech
>
> 2016-03-01 16:37 GMT+01:00 Jonas Frey (Probe Networks) <
> jf at probe-networks.de
> >:
>
> > Hello,
> >
> > i am getting the following notice in the logs:
> >
> > Mar  1 13:58:07   fpc0 CMIC(0/3): VSC8248 cmic-vsc8248-0/0/7 is running
> > out-of-date firmware version 2.52 (0x234).  Please upgrade firmware to
> > version 2.53 (0x235) or later.
> >
> > Does anyone know howto update these?
> >
> > -Jonas
> >
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Bill Blackford

Logged into reality and abusing my sudo privileges.....