[j-nsp] Routing specific traffic on LSPs

[Mark Tinka]

On 5/May/16 15:26, Aaron wrote:

> I wondering a couple things... 
>
> 1 - would the lsp would need to be defined as going over the radio link that
> Anand is talking about ?
> 2 - would he put a route-filter x.x.x.x/xx for only his critical subnets
> that he needs to route over the radio link lsp ?

I was waiting for the OP's feedback on this, but in the absence of that,
he could use DCU to"identify" the particular source traffic that needs
to be routed over the LSP during a failover condition.

Mark.