[j-nsp] ACX5048 - Virtual Chassis

Aaron aaron1 at gvtc.com
Fri May 13 10:28:15 EDT 2016


Thanks Giuliano,  I don't want to waste too much of my time and yours on
this if it's not supported... but just was curious what I could get away
with here....

It seems like I can add/delete gige ports as virtual-chassis vc ports, but
it says "absent"

{master:0}
agould at eng-lab-5048-1> request virtual-chassis vc-port set pic-slot 0 port
36
Port conversion initiated,  use show virtual-chassis vc-port to verify

{master:0}
agould at eng-lab-5048-1> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface   Type              Trunk  Status       Speed        Neighbor
or                             ID                 (mbps)       ID  Interface
PIC / Port
0/36        Configured               Absent

{master:0}
agould at eng-lab-5048-1> request virtual-chassis vc-port delete pic-slot 0
port 36
vc-port successfully deleted

{master:0}
agould at eng-lab-5048-1> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------

{master:0}
agould at eng-lab-5048-1>

agould at eng-lab-5048-1> show chassis hardware
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                x      ACX5048
Pseudo CB 0
Routing Engine 0          BUILTIN      BUILTIN           ACX5K Routing
Engine
FPC 0            REV 07   x   x      ACX5048
  CPU                     BUILTIN      BUILTIN           FPC CPU
  PIC 0                   BUILTIN      BUILTIN           48x10G-6x40G
    Xcvr 36               NON-JNPR     x       SFP-T

Power Supply 0   REV 04   740-043886   x      JPSU-650W-DC-AFO
Power Supply 1   REV 04   740-043886   x       JPSU-650W-DC-AFO
Fan Tray 0                                               ACX5K Fan Tray 0,
Front to Back Airflow - AFO
Fan Tray 1                                               ACX5K Fan Tray 1,
Front to Back Airflow - AFO
Fan Tray 2                                               ACX5K Fan Tray 2,
Front to Back Airflow - AFO
Fan Tray 3                                               ACX5K Fan Tray 3,
Front to Back Airflow - AFO
Fan Tray 4                                               ACX5K Fan Tray 4,
Front to Back Airflow - AFO

{master:0}


- Aaron

p.s. this doesn't seem to work either....

agould at eng-lab-5048-1> request virtual-chassis vc-port set interface
ge-0/0/36
error: Interface ge-0/0/36 is not a virtual chassis interface





More information about the juniper-nsp mailing list