[j-nsp] BFD/IS-IS wait to re-establish adjacency after failure tweak knob?

[Mark Tinka]

On 19/May/16 01:11, Clarke Morledge wrote:

> Thanks, Mark.
>
> I looked into that, but the situation is such that the physical link
> itself remains up. The problem is that the L2 device in between is
> dropping packets. I should have clarified that.

In that case, BFD is your friend.

You could play with the IGP timers, but slowing that down is normally a
bad thing unless you are willing to live with slow IGP convergence.

Mark.