[j-nsp] BFD/IS-IS wait to re-establish adjacency after failure tweak knob?

[Mark Tinka]

On 19/May/16 11:49, James Bensley wrote:

> In Cisco land we have the interface command "carrier-delay", for Junos
> (this scenario) can the OP not use some variant of "set interfaces
> xe-0/0/1 hold-time up 5000" ?

OP says the issue is remote.

Local link to provider's switch does not fail, and appears to have no
way of relaying upstream outages to the OP's port.

Mark.