[j-nsp] MX upgrade to 15.1R4.6: loopback filters drop all traffic

[Diogo Montagner]

This sounds like activating enhanced-ip and forgetting to reboot the box
immediately after it.

I never saw this type of issue caused by upgrades.

On Sunday, 18 September 2016, Chuck Anderson <cra at wpi.edu> wrote:

> Has anyone upgraded from 14.2 to 15.1 and seen this issue?  Right
> after the upgrade, all loopback filters started dropping all traffic
> causing OSPF & BGP failures, inability to ping or SSH into fxp0, etc.,
> despite being configured to allow the appropriate management & control
> plane traffic which was working perfectly fine in 14.2.
> Deactivating/reactivating the filters "fixed" the issue, as did a full
> box reboot.  Of course JTAC can't reproduce it.  64-bit Junos,
> RE-1800X4's.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
./diogo -montagner
JNCIE-SP 0x41A