[j-nsp] Limit content of bgp.l3vpn.0

Ivan Ivanov ivanov.ivan at gmail.com
Wed Sep 28 06:50:25 EDT 2016


This is a solution to your problem:


Give it a try first in a lab test first. If you use RR you should copy its
loopback address to inet.3 on all PEs.


On Wed, Sep 28, 2016 at 11:01 AM, Johan Borch <johan.borch at gmail.com> wrote:

> Hi
> Lets say i have two PE-routers, router1 and router2.
> They run MP-BGP, MPLS and so on, the usual stuff. I have one VRF with a lot
> of routes in (DFZ). Router2 is not importing the vrf-target for this VRF.
> My problem is that router2 is dead slow and even if I'm not importing this
> perticual vrf-target it still takes ages to go through all routes, can I
> somehow limit what router1 sends to router2 in the bgp.l3vpn.0 table?
> Johan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

Best Regards!

Ivan Ivanov

More information about the juniper-nsp mailing list