[j-nsp] JunOS Telemetry
Pallavi Mahajan
pallavi at juniper.net
Tue Apr 11 12:00:03 EDT 2017
Hi Shaffi,
David is correct. In 15.1, JTI is supported only in F branch (15.1F6 is
recommended)
Thanks,
Pallavi
On 11/04/17, 9:08 PM, "juniper-nsp on behalf of david.roy at orange.com"
<juniper-nsp-bounces at puck.nether.net on behalf of david.roy at orange.com>
wrote:
>Actually, not sure your release supports it. Indeed Junos Telemetry
>Interface was introduced in Junos OS Release 15.1F3. not sure R branch
>supports it
>
>
>-----Message d'origine-----
>De : Shaffi Khan [mailto:shaffik at interxion.com]
>Envoyé : mardi 11 avril 2017 17:27
>À : ROY David DTSI/DERS; juniper-nsp at puck.nether.net
>Objet : RE: [j-nsp] JunOS Telemetry
>
>Yes, I did try "restart SDN-Telemetry immediately", but there was no
>effect.
>
>Unfortunately I'm not able to try a different version at this point in
>time.
>
>-----Original Message-----
>From: david.roy at orange.com [mailto:david.roy at orange.com]
>Sent: 11 April 2017 3:41 PM
>To: Shaffi Khan <shaffik at interxion.com>; juniper-nsp at puck.nether.net
>Subject: RE: [j-nsp] JunOS Telemetry
>
>Strange. It works for me. Maybe a bug or a limitation with your version ?
>
>Did you try to force SDN-telemetry restart ?
>
>-----Message d'origine-----
>De : Shaffi Khan [mailto:shaffik at interxion.com] Envoyé : mardi 11 avril
>2017 15:57 À : ROY David DTSI/DERS; juniper-nsp at puck.nether.net Objet :
>RE: [j-nsp] JunOS Telemetry
>
>Hmm, I'm not seeing any sensors there
>
>start shell pfe network fpc2
>
>
>RMPC platform (1200Mhz QorIQ P2020 processor, 3584MB memory, 512KB flash)
>
>NGMPC2(MX-testlab-re0 vty)# show agent sensors
> ID Name
> ---------- --------------------------------
>
>Total number of SENSOR = 0
>
>
>I've just seen this on the documentation page: "Junos Telemetry
>Interface was introduced in Junos OS Release 15.1F3 on MX Series routers"
>https://www.juniper.net/documentation/en_US/junos/topics/task/configuratio
>n/junos-telemetry-interface-configuring.html
>
>I wonder if it is because I'm running 15.1R4? It's odd that the
>telemetry commands are available though....
>
>-----Original Message-----
>From: david.roy at orange.com [mailto:david.roy at orange.com]
>Sent: 11 April 2017 2:37 PM
>To: Shaffi Khan <shaffik at interxion.com>; juniper-nsp at puck.nether.net
>Subject: RE: [j-nsp] JunOS Telemetry
>
>Ok.
>
>Could you check at PFE level if sensors are well instanced ?
>
>start shell pfe network fpcX
>show agent sensors
>
>ex.
>show agent sensors
>
> Jvision ID Name
> ---------- --------------------------------
> 13222432 sensor-13 5000(300)
> 13222433 sensor-12 5000(4902)
> 13222434 sensor-11 5000(1348)
> 13222439 sensor-14 5000(843)
> 13222443 sensor-18 0(0)
> 13222464 sensor-23 5000(300)
> 13222465 sensor-22 5000(4001)
> 13222466 sensor-21 5000(1348)
> 13222471 sensor-24 5000(843)
> 13222475 sensor-28 0(0)
> 129585707 __default_fabric_sensor__ 5000(3972)
>
>Total number of jvision SENSORs = 11
>
>
>-----Message d'origine-----
>De : Shaffi Khan [mailto:shaffik at interxion.com] Envoyé : mardi 11 avril
>2017 15:35 À : ROY David DTSI/DERS; juniper-nsp at puck.nether.net Objet :
>RE: [j-nsp] JunOS Telemetry
>
>Hi David
>
>It seems to be running:
>
>show system processes extensive | match agentd
>20980 root 1 20 0 717M 5584K select 0 0:05 0.00% agentd
>20997 root 1 24 0 720M 4468K select 3 0:00 0.00%
>stats-agentd
>
>Polling is a large number because the value is measured in nano seconds:
>
>{master}[edit services analytics sensor test-sensor] testlab at MXtestlab#
>set polling-interval ?
>Possible completions:
> <polling-interval> Define sensor polling interval in nano secs
>(nanoseconds)
>
>
>So I'm polling every 0.1 seconds.
>
>Simarly, reporting-rate under export-profile is measured in milliseconds,
>so I'm reporting every second.
>
>
>
>-----Original Message-----
>From: david.roy at orange.com [mailto:david.roy at orange.com]
>Sent: 11 April 2017 2:24 PM
>To: Shaffi Khan <shaffik at interxion.com>; juniper-nsp at puck.nether.net
>Subject: RE: [j-nsp] JunOS Telemetry
>
>Hello
>
>Does agent is running ?
>
>show system processes extensive | match agentd
>26812 root 3 20 0 735M 13136K nanslp 1 0:15 0.00%
>agentd
>
>You could try to restart process :
>
>restart SDN-Telemetry immediately
>
>I see your polling interval is very high David
>
>
>-----Message d'origine-----
>De : juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] De la part
>de Shaffi Khan Envoyé : mardi 11 avril 2017 15:05 À :
>juniper-nsp at puck.nether.net Objet : [j-nsp] JunOS Telemetry
>
>I've just started investigating using the Juniper telemetry interface for
>analytics on MX routers, but I'm having some problems getting it running.
>
>I'm using the Juniper Open NTI collector, which is up and running
>(default config, no changes made whatsoever), however it never receives
>any data, as confirmed by a tcpdump on the box.
>
>My setup is thus:
>
>testlab at MXtestlab # run show version
>Hostname: MXtestlab
>Model: mx240
>Junos: 15.1R4-S2.1
>
>sensor test-sensor {
> server-name open-nti;
> export-name test-telemetry;
> polling-interval 100000000;
> resource /junos/system/linecard/interface/;
>}
>streaming-server open-nti {
> remote-address 10.100.0.127;
> remote-port 50000;
>}
>export-profile test-telemetry {
> local-address 10.100.0.96;
> local-port 30010;
> reporting-rate 1000;
> format gpb;
> transport udp;
>}
>
>The problem I see is that "show agent sensors" never reports a sensor:
>testlab at MXtestlab# run show agent sensors
>
>{master}[edit services analytics]
>
>I've read over the Juniper docs and can't see anything obvious that I'm
>missing, however I'm sure it is something simple.
>
>If anyone has any idea's I'd love to hear them!
>
>TIA
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>__________________________________________________________________________
>_______________________________________________
>
>Ce message et ses pieces jointes peuvent contenir des informations
>confidentielles ou privilegiees et ne doivent donc pas etre diffuses,
>exploites ou copies sans autorisation. Si vous avez recu ce message par
>erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les
>pieces jointes. Les messages electroniques etant susceptibles
>d'alteration, Orange decline toute responsabilite si ce message a ete
>altere, deforme ou falsifie. Merci.
>
>This message and its attachments may contain confidential or privileged
>information that may be protected by law; they should not be distributed,
>used or copied without authorisation.
>If you have received this email in error, please notify the sender and
>delete this message and its attachments.
>As emails may be altered, Orange is not liable for messages that have
>been modified, changed or falsified.
>Thank you.
>
>
>__________________________________________________________________________
>_______________________________________________
>
>Ce message et ses pieces jointes peuvent contenir des informations
>confidentielles ou privilegiees et ne doivent donc pas etre diffuses,
>exploites ou copies sans autorisation. Si vous avez recu ce message par
>erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les
>pieces jointes. Les messages electroniques etant susceptibles
>d'alteration, Orange decline toute responsabilite si ce message a ete
>altere, deforme ou falsifie. Merci.
>
>This message and its attachments may contain confidential or privileged
>information that may be protected by law; they should not be distributed,
>used or copied without authorisation.
>If you have received this email in error, please notify the sender and
>delete this message and its attachments.
>As emails may be altered, Orange is not liable for messages that have
>been modified, changed or falsified.
>Thank you.
>
>
>__________________________________________________________________________
>_______________________________________________
>
>Ce message et ses pieces jointes peuvent contenir des informations
>confidentielles ou privilegiees et ne doivent donc pas etre diffuses,
>exploites ou copies sans autorisation. Si vous avez recu ce message par
>erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les
>pieces jointes. Les messages electroniques etant susceptibles
>d'alteration, Orange decline toute responsabilite si ce message a ete
>altere, deforme ou falsifie. Merci.
>
>This message and its attachments may contain confidential or privileged
>information that may be protected by law; they should not be distributed,
>used or copied without authorisation.
>If you have received this email in error, please notify the sender and
>delete this message and its attachments.
>As emails may be altered, Orange is not liable for messages that have
>been modified, changed or falsified.
>Thank you.
>
>
>__________________________________________________________________________
>_______________________________________________
>
>Ce message et ses pieces jointes peuvent contenir des informations
>confidentielles ou privilegiees et ne doivent donc
>pas etre diffuses, exploites ou copies sans autorisation. Si vous avez
>recu ce message par erreur, veuillez le signaler
>a l'expediteur et le detruire ainsi que les pieces jointes. Les messages
>electroniques etant susceptibles d'alteration,
>Orange decline toute responsabilite si ce message a ete altere, deforme
>ou falsifie. Merci.
>
>This message and its attachments may contain confidential or privileged
>information that may be protected by law;
>they should not be distributed, used or copied without authorisation.
>If you have received this email in error, please notify the sender and
>delete this message and its attachments.
>As emails may be altered, Orange is not liable for messages that have
>been modified, changed or falsified.
>Thank you.
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list