[j-nsp] help with new re-s-1800x4 and ssd

[Dragan Jovicic]

Hi,

1. Mixing REs is not recommended and not officially supported. I have mixed
certain similar RE models fine (all 32-bit versions), and given similarity
between these two (dual-core vs quad-core) I would say it *should *work.
2. There are couple of ways; probably the easiest is to boot from USB
drive, and at interrupted loader prompt install from it. There should be
documentation online.

BR,
+Dragan

On Sat, Apr 22, 2017 at 7:31 PM, John Brown <john at citylinkfiber.com> wrote:

> Hi,
> We have an existing MX480 running a re-s-1800x2 on a single SCBE.
> I want to install a second SCBE and a re-s-1800x4 into the chassis.
> The SSD drive I have for the new RE is blank.
>
> So.
>
> 1. Can I mix RE's on the same chassis ? while maintaining production ?
>
> 2. How do go about formatting and installing Junos on the new SSD in
> the new re-1800 ??
>
>
> thank you in advance
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>