[j-nsp] mx480, netflow/version9 ipv6 help

[Alvaro Pereira]

Hi John,

Do you have the following configured on the fpc you have installed? *ATTENTION!
THIS WILL AUTOMATICALLY REBOOT THE FPC !!!*

https://www.juniper.net/documentation/en_US/junos12.3/topics/reference/configuration-statement/ipv6-flow-table-size.html

*Note: *Any change in the configured size of the flow hash table sizes
initiates an automatic reboot of the FPC.

set chassis fpc 0 inline-services flow-table-size ipv4-flow-table-size 12
set chassis fpc 0 inline-services flow-table-size ipv6-flow-table-size 3

You might want to play with the numbers depending on your use case.

Alvaro

On Wed, Aug 23, 2017 at 7:17 AM, John Brown <john at citylinkfiber.com> wrote:

> Hi,  I'm trying to add IPv6 to my flow picture and I'm getting an
> error from Junos.
> Any help is much appreciated.  THANK YOU
>
> Junos: 14.2R1.9
>
> Error from commit check
>
>  sampling inline configuration error
>     Can't configure inline output with V5, V8 and V9 collector
> configured for family inet6
>
> Config snip
>
> family inet {
>     output {
>         flow-server 192.168.1.2 {
>             port 2055;
>             version9 {
>                 template {
>                     ipv4;
>                 }
>             }
>         }
>         inline-jflow {
>             source-address 10.0.0.1;
>         }
>     }
> }
> family inet6 {
>     output {
>         flow-server 192.168.1.2 {
>             port 2055;
>             version9 {
>                 template {
>                     ipv6;
>                 }
>             }
>         }
>         inline-jflow {
>             source-address 10.0.0.1;
>         }
>     }
> }
>
> flow-monitoring {
>     version9 {
>         template ipv4 {
>             ipv4-template;
>         }
>         template ipv6 {
>             ipv6-template;
>         }
>     }
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>