[j-nsp] traceroute in mpls vpn's not showing P hops

[Chris Burton]

I am not sure why it is not working for you (assuming you have 
bi-directional LSPs in place and no other routing or filter issues), but 
I do recall a previous exchange with you on this list about you possibly 
using the VMX, I have seen randomly at times in the past that when using 
the VMX (not sure if you are using this now or a phy router) with 
logical systems and the logical tunnel interfaces that icmp tunneling 
would not work or would stop working until I shutdown the CP/DP 
(basically a full shutdown and startup), which is why I moved to using 
the built-in interfaces with Linux Bridge as the underlying connection 
as I have not yet seen that same behavior with those interfaces.

-C


On 08/24/2017 08:50 AM, Aaron Gould wrote:
>
> Thanks Shamen,
>
> set logical-systems r2 protocols mpls icmp-tunneling
>
> set logical-systems r3 protocols mpls icmp-tunneling
>
> set logical-systems r4 protocols mpls icmp-tunneling
>
> set logical-systems r5 protocols mpls icmp-tunneling
>
> set logical-systems r6 protocols mpls icmp-tunneling
>
> set logical-systems r7 protocols mpls icmp-tunneling
>
> set logical-systems r8 protocols mpls icmp-tunneling
>
> r1 and r9 are ce’s.
>
> -Aaron
>