[j-nsp] IPV6 IPFIX Flow issues "nodata" on flow collector.

[João Lyma.]

Hi Gustavo,

Same problem here...
I use nfdump with nfsen.
Router: MX480 with JUNOS 16.1R3.10 64-bit kernel 
JNPR-10.3-20160927.337663_build

Regards,

Lyma


Em 30/11/2017 00:13, Gustavo Santos escreveu:
> Hi,
> 
> Anyone else had issues with Junos 16.1R4 with IPV6 and IPFIX?
> 
> Here we use Plixer Scrutinizer as Flow collector and analyzer. IPv4 
> flow
> monitoring is working as intended. With IPv6 , looks like the collector 
> is
> don´t know what to do with the data the Router is sending (MX480).
> 
> After a Call , looks like the router is not sending the correct 
> templates
> to Scrutinizer, the only information it can identify is the current
> interface traffic from the flows. But no source and destination ipv6
> address.
> 
> I already opened a JTAC support, but looks like the JTAC doesn´t even 
> have
> a clue... I asked a friend that have the same router at another ISP and 
> he
> have the same issue with NFSEN/FASTNETMON..
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp