[j-nsp] Copper transcievers in QFX5100, EX4600 and ACX5048

[Alain Hebert]

     Rofl,

     That's why!!!

     We where wondering why 0 & 2 worked but not 0 & 1.

-----
Alain Hebert                                ahebert at pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443

On 12/05/17 09:40, Karl Gerhard wrote:
> Hello
>
> the official documentation for QFX5100, EX4600 and ACX5048 contains the following statement:
> https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/specifications/port-panel-qfx5100-48S.html
> "Caution: Do not place a copper transceiver in an access port directly above or below another copper transceiver. Internal damage to the access ports and switch can occur. We recommend either using the top port row exclusively, or bottom port row exclusively, for copper transceivers."
>
> Does this apply only to Direct Attach Cables or copper SFP modules oder both? This is potentially a big thing for us since we would like to use copper SFP modules on some of our devices.
>
> Regards
> Karl
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>