[j-nsp] Measure transit traffic to specific destination

[Masood Ahmad Shah]

If you don't wanna pay then make use of a free collector (aka opensource)
i.e.
http://www.ntop.org/ (i have had and used this +1)

Or more here:
https://www.pcwdld.com/free-open-source-netflow-analyzers




On Sat, Dec 31, 2016 at 2:41 AM, Matthew Crocker <matthew at corp.crocker.com>
wrote:

>
> I’m sending IPFIX flows to Scrutinizer and can generate the type of
> reports you are looking for.   ‘All bandwidth from X ASN’, ect
>
> https://www.plixer.com/products/scrutinizer/
>
> On 12/30/16, 2:16 AM, "juniper-nsp on behalf of Santanu Mandal" <
> juniper-nsp-bounces at puck.nether.net on behalf of
> santanumandal2007 at gmail.com> wrote:
>
>     Dear all,
>     I want to measure traffic bandwidth consuming for a specific
> destination IP
>     from My Orzanization. Say how much is bandwidth is consumed for
> destination
>     x.x.x.x out of total bandwidth in my ISP link.
>
>     I have configured S-flow, but there I can see total amount of traffic
>     transfered over a period of time. But My concern is, data transfer rate
>     confumed for this destination, not tootal amount of data.
>
>     It would be gratfull if you can suggest a tool for this purpose or how
> to
>     approach to achive this.
>
>
>
>     Thanking you
>     ​ in advance​
>
>
>     Santanu
>     _______________________________________________
>     juniper-nsp mailing list juniper-nsp at puck.nether.net
>     https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>