[j-nsp] MX240 (orMX960) with QFX5100 in Fusion

[Shaffi Khan]

Have you (or anyone else) happened to use Fusion with the CSD module of Junos Space?

I would expect that as ports on the Satellite devices just appear on the Aggregation device as a regular interface it would work, but it would be good to know if any one has any real world (or even lab) experience with this

Shaffi

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jackson, William
Sent: 22 July 2017 11:12 PM
To: ahebert at pubnix.net; Juniper List <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] MX240 (orMX960) with QFX5100 in Fusion

Been looking at fusion edge with qfx5100 and ex4300.
Using 16.X code and so far so good.



On 19/07/2017, 21:03, "juniper-nsp on behalf of Alain Hebert" <juniper-nsp-bounces at puck.nether.net on behalf of ahebert at pubnix.net> wrote:

         Hi,
    
         Anyone has feedback about Fusion when MX240-MX960 and QFX5100 are 
    concerned.
    
         Our foray into QFX5100/VCF only was not very successful. :(
    
    -- 
    -----
    Alain Hebert                                ahebert at pubnix.net
    PubNIX Inc.
    50 boul. St-Charles
    P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
    Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443
    
    _______________________________________________
    juniper-nsp mailing list juniper-nsp at puck.nether.net
    https://puck.nether.net/mailman/listinfo/juniper-nsp
    

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp