[j-nsp] can i see bgp looped AS PATH prefixes on the receiving router

[Shamen Snyder]

Looped as-path routes should show up as hidden. Do you have *bgp keep none *
configured?

On Fri, Jun 16, 2017 at 8:44 AM, Aaron Gould <aaron1 at gvtc.com> wrote:

> Nothing hidden.
>
>
>
>
>
> [edit]
>
> r4 at lab-mx104:r4# run show route receive-protocol bgp 10.0.2.9
>
>
>
> inet.0: 33 destinations, 33 routes (33 active, 0 holddown, 0 hidden)
>
>   Prefix                  Nexthop              MED     Lclpref    AS path
>
> * 192.168.50.0/24         10.0.2.9                     100        (65001)
> I
>
> * 192.168.60.0/24         10.0.9.6                     100        (65001)
> I
>
> * 192.168.70.0/24         10.0.9.7                     100        (65001)
> I
>
>
>
> [edit]
>
> r4 at lab-mx104:r4# run show route receive-protocol bgp 10.0.2.9 hidden
>
>
>
> inet.0: 33 destinations, 33 routes (33 active, 0 holddown, 0 hidden)
>
>
>
> [edit]
>
> r4 at lab-mx104:r4# run show route hidden
>
>
>
> inet.0: 33 destinations, 33 routes (33 active, 0 holddown, 0 hidden)
>
>
>
> - Aaron Gould
>
>
>
>
>
> From: Tomasz Mikołajek [mailto:tmikolajek at gmail.com]
> Sent: Friday, June 16, 2017 7:17 AM
> To: Aaron Gould <aaron1 at gvtc.com>
> Subject: Re: [j-nsp] can i see bgp looped AS PATH prefixes on the
> receiving router
>
>
>
> Hello.
>
> Trzy Show route hidden
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>