[j-nsp] Cut-through forwarding statistics on QFX5100

[Chris]

On 22/06/2017 11:27 PM, Nelson, Brian wrote:
> Model: qfx5100-96s-8q
> Junos: 14.1X53-D42.3
> 
> user at qfx5100-96s# set forwarding-options cut-through ?
> Possible completions:
>    <[Enter]>            Execute this command
>> accounting           Configure accounting of traffic
>> analyzer             Analyzer options
> + apply-groups         Groups from which to inherit configuration data
> + apply-groups-except  Don't inherit configuration data from these groups

Appears to be present on 16.1:

me at switch# set forwarding-options ?
Possible completions:
 > access-security      Access security configuration
 > accounting           Configure accounting of traffic
 > analyzer             Analyzer options
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
   cut-through          Enable cut-through forwarding
 > dhcp-relay           Dynamic Host Configuration Protocol relay 
configuration
 > enhanced-hash-key    Select data used in the hash key for Enhanced IP 
Forwarding Engines
 > family               Protocol family
 > hash-key             Select data used in the hash key
 > helpers              Port forwarding configuration
 > ip-options-protocol-queue  IP Options protocol logical queue parameters
 > load-balance         Configure load-balancing attributes on the 
forwarding path
 > local-bias           Turn on local bias functionality
   no-load-balance-label-capability  Disable load balance label capability
 > port-mirroring       Configure port mirroring of traffic
 > storm-control-profiles  Storm control profile for this instance
   vrf-fallback         Enable vrf-fallback forwarding. This will 
restart PFE

me at switch# run show version
fpc0:
--------------------------------------------------------------------------
Hostname: core
Model: qfx5100-48s-6q
Junos: 16.1R3.10 limited