[j-nsp] error: the ethernet-link-fault-management subsystem is not running on a EX2300

Valentini, Lucio Lucio.Valentini at siag.it
Wed Mar 1 09:16:28 EST 2017


Hi there,

On an EX2300-C-12P-2G I have the following configuration:

set protocols oam ethernet link-fault-management interface ge-0/1/0 pdu-interval 800
set protocols oam ethernet link-fault-management interface ge-0/1/0 link-discovery passive
set protocols oam ethernet link-fault-management interface ge-0/1/0 pdu-threshold 10
set protocols oam ethernet link-fault-management interface ge-0/1/0 negotiation-options allow-remote-loopback

but when I want to show the status, it tells me the process is not running

user @ sw>show oam ethernet link-fault-management
error: the ethernet-link-fault-management subsystem is not running

I tried to restart the process, but it failed

Mar  1 14:56:16.152 2017  BB-Meltina-MUN-sw mgd[15094]: UI_RESTART_EVENT: User 'lvalentiniadmin' restarting daemon 'Ethernet OAM Link-Fault-Management process'
Mar  1 14:56:26.939 2017  BB-Meltina-MUN-sw mgd[15094]: UI_RESTART_FAILED_EVENT: Failed to restart 'Ethernet OAM Link-Fault-Management process'

Any clue?

Thanks

Cheers

Lucio


More information about the juniper-nsp mailing list