[j-nsp] It is about cisco command

[Brijesh Patel]

Hi Saku,

Thanks for your response.

In juniper* test *command will test before apply to neighbour

Where in cisco , once you implement command go into nvram so bit not give
answer.

Regards,

Brijesh Patel


On Tue, Mar 21, 2017 at 8:00 PM, Saku Ytti <saku at ytti.fi> wrote:

> Hey,
>
> > *Juniper>test policy CUSTOMER-BGP-ABC-Consultancy-V4 192.168.x.y/24 *
> >
> > *Is there any command in cisco to test roue-map and prefix-list. *
>
> Pretty sure best you get is 'show ip bgp route-map XYZ'
>
> --
>   ++ytti
>