[j-nsp] vMX SR-IOV

[Stefan Stoyanov]

Hi everyone,

Does anyone have an idea, why vMX SR-IOV vlan-tagging isn't working?
If I use "unit 0" without any VLANs configured on the interface everything
is okay.

Is it possible to be something related to the NIC which I am using?
Also, do I need to disable some of the following feature ( or all of them
)?

rx-vlan-offload: on
tx-vlan-offload: on
rx-vlan-filter: on



*0a:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)*
*        Subsystem: Intel Corporation Ethernet Server Adapter X520-2*
*        Physical Slot: 2*
*        Flags: bus master, fast devsel, latency 0, IRQ 68*
*        Memory at e7080000 (64-bit, non-prefetchable) [size=512K]*
*        I/O ports at 5020 [size=32]*
*        Memory at e7304000 (64-bit, non-prefetchable) [size=16K]*
*        Capabilities: [40] Power Management version 3*
*        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+*
*        Capabilities: [70] MSI-X: Enable+ Count=64 Masked-*
*        Capabilities: [a0] Express Endpoint, MSI 00*
*        Capabilities: [100] Advanced Error Reporting*
*        Capabilities: [140] Device Serial Number 00-1b-21-ff-ff-89-48-f4*
*        Capabilities: [150] Alternative Routing-ID Interpretation (ARI)*
*        Capabilities: [160] Single Root I/O Virtualization (SR-IOV)*
*        Kernel driver in use: ixgbe*
*        Kernel modules: ixgbe*